Requested pics of "WheatCues"

masonh said:


There's NO woops about it !!!

I feel that should be between me and HAN and not anyone else and wanted to know who I was disussing someone else's business with !

I stand behind my work 100% and have replaced countless Ivory ferrules as well as working on every single aspect of the repair business 1000's of times, so when someone like this goes out of his way to bash me publically when I have made every attempt to rectify the problem is completely uncalled for !!!!

I personally think there's a little more behind the motivation becasue he's a player too ...

But in all actuallity I offered to replace the ferrule and tip at my cost and made multiple attempt to r-contact him via cell phone and never heard a peep until now which is months later !


The end result is that he was right there in the same room with me watching the job and Since I made ZERO contact with the Ivory ferrule why should I be 100% monetarily liable for the incident... expecially since this IS the first time that has ever happened in MY presence in the 18+ years I have been doing this ???


- Eddie Wheat
 
WheatCues said:
LOOK HAN !!!

YOU COME TO MY SHOP IN THE LATE EVENING TIME TO GET A REPAIR JOB DONE... FORGIVE ME FOR NOT HAVING CHANGE for a 50.00 bill

secondly, no one gets anything for free especially since I did NOT build the cue....

Thirdly,ferrules are not supposed to crack when doing tip replacements so why would I even bother forwarning you about possible chipping when it's not warranted

finally... who gives a damn about what I drink or do in my personal life.... I offered to reapir it at 100% and you never return my calls

You are out of line coming on here publically bashing me for a defective ferrule... paul drexler is not above making a mistake and I am not saying he did... Ivory is a very peculiar bone and since it's grainy alot of varibles can cause it to come apart, chip or break throgh general playing and storing conditions... it's not common but happens.....

I still am willing to replace it for my cost of and Ivory ferrule and tip... just to make you happy and save face... but when you fail to call me back after I made every attempt to rectify thge problem and you go on here showing your ass about it, I think that is definitley uncalled for !


- Eddie Wheat

Sounds like a valid argument and that you tried to offer a solution. It really seems, from my perspective, that you need to work on, well...not being so vocal :)

That said...what would an 8 point (points in forearm and butt) with rings cost, approximately?
 
D-Sub said:
Sounds like a valid argument and that you tried to offer a solution. It really seems, from my perspective, that you need to work on, well...not being so vocal :)

That said...what would an 8 point (points in forearm and butt) with rings cost, approximately?


Your right... but he's making me out to be the BAD GUY and that I am NOT !

Besides If it comes down to it just to make him happy I'll eat the whole bill if that's what is neccessay to resolve this sudden issue, but I just wanted to express the entire scenario's details and try to come to some type of compromise rather than me paying entirely for something I did NOT cause or do !


I need to know what kind of woods your are wanting for your 8-point cue so that I can give you an approx. quote !


Thanks, Eddie Wheat
 
hmmm...

ebony forearm, buttsleeve. uh...what about...amboyna burl and that awesome figured wood in the points?

I like dark forearmed cues with lighter/contrasting points. Veneers, too?

sorry...hard to be specific when you're kinda..j.ust...dreaming.
 
Break Cue

Hi Eddie,

Did you get my email so you can send me some pics.

Thanks
Andrea

I looked on your slideshow, but didnt see any break cues.
 
Milo said:
Hi Eddie,

Did you get my email so you can send me some pics.

Thanks
Andrea

I looked on your slideshow, but didnt see any break cues.


Yes I did....

I will be sending you pics very shortly !!!


Thanks again, Eddie Wheat
 
ARM9BALLER said:
Kam,
I don't know if this helps but, he is a night owl. Right now he is probably sleeping and won't get up til 3 pm (Eastern time). As far as the emails? Couldn't tell you.


thanks... this all happened about 2 weeks ago ...

appreciate the reply, though...

i got what i needed from leon sly and am happy with his cue and follow up so it's all good ...


kam
 
D-Sub said:
hmmm...

ebony forearm, buttsleeve. uh...what about...amboyna burl and that awesome figured wood in the points?

I like dark forearmed cues with lighter/contrasting points. Veneers, too?

sorry...hard to be specific when you're kinda..j.ust...dreaming.


No problem....

My base price on custom fitted cues is 350.00 this includes forearm/buttsleeve woods as well as 2 sets of decorative rings as well as the other typicval pieces that make up a cue....

That price includes the ebony unless you want a select grade "solid black" and that is an additional charge....

My prices for points are 25.00-55.00 each depending on the grade and/ or particular exotic burl/wood you might want....

Veneers are usually 2.50-5.00 total price on each prong

I do NOT have amboyna in stock due to its outrageous cost but I will call for price if you are interested !!!

Hope this helps give you a good ballpark of what to expect.....


Thanks for your interest !!!!


- Eddie Wheat
 
WheatCues said:
KAm, Please leave a message this way I know you called and also have a number to get back to you with....

I receive quite a few calls a day and some are "sales" so it makes it hard to filter through the caller I.D.

I do return all calls and are looking forward to doing business with you so if you like... give me your number and I'll call you if that makes it easier !!!

Arm9baller is correct about my sleeping habits.... also I care for a 94 yr old grandma that resises with me so it makles it much easaier for me to work in the evening through the early a.m. hours....


Thanks, Eddie Wheat


hi eddie,

sent you 2 emails as well .. not sure if you got them.

i live in hong kong ... it may cost you a bit to call so let me know when is a good time and i can call you ... the later the better cos i am probably 12 hours ahead so 3 am is 3 in the afternoon for me.. :)

or buzz me when you are free and i can call you right back .. have a deal with the tele co. so it costs me just 3 cents a minute !

+852 90217197



thanks for the reply... appreciate it

kam
 
kamdaswani said:
hi eddie,

sent you 2 emails as well .. not sure if you got them.

i live in hong kong ... it may cost you a bit to call so let me know when is a good time and i can call you ... the later the better cos i am probably 12 hours ahead so 3 am is 3 in the afternoon for me.. :)

or buzz me when you are free and i can call you right back .. have a deal with the tele co. so it costs me just 3 cents a minute !

+852 90217197


thanks for the reply... appreciate it

kam


Sorry I did NOT receive the e-mails either.....

Anytime in the late afternoons is good for me so from now until you goto bed is a great time to call !!



- Eddie WHeat
 
kamdaswani said:
thanks for the call... appreciate it !

PM sent.


You're welcome !!!!

I don't mind eating the phone bill even when it's to HONG KONG as long as it's business related....

I'll get the info. for you shortly and we'll proceed from there !!

Thanks again for your business !





- Eddie Wheat
 
If you google it, you get this

Wing span = Did you mean: wingspan

Armspan = Did you mean: arm span

???

Weird
 
Last edited:
ARM9BALLER said:
If you google it, you get this

Wing span = Did you mean: wingspan

Armspan = Did you mean: arm span

???

Weird


I can relate !!!!

Whenever I google myself... I end up making a bigger mess than I intended or I make a smaller mess when expecting a big one !!!

???

Weird !!!


- Eddie
 
Last edited:
WheatCues said:
No problem....

My base price on custom fitted cues is 350.00 this includes forearm/buttsleeve woods as well as 2 sets of decorative rings as well as the other typicval pieces that make up a cue....

That price includes the ebony unless you want a select grade "solid black" and that is an additional charge....

My prices for points are 25.00-55.00 each depending on the grade and/ or particular exotic burl/wood you might want....

Veneers are usually 2.50-5.00 total price on each prong

I do NOT have amboyna in stock due to its outrageous cost but I will call for price if you are interested !!!

Hope this helps give you a good ballpark of what to expect.....


Thanks for your interest !!!!


- Eddie Wheat

Eddie

I like the "a la carte" idea on options!

Sorry I forgot I had been involved in this conversation. Too much NPR bs trying to argue with the neocons

soon as I get some liquid assets I'll hit you up. I assume you need cash up front, or...?
 
D-Sub said:
Eddie

I like the "a la carte" idea on options!

Sorry I forgot I had been involved in this conversation. Too much NPR bs trying to argue with the neocons

soon as I get some liquid assets I'll hit you up. I assume you need cash up front, or...?



No problem....

I do require a 50% deposit and can have your cue to you between 90-120 days !!!

Whenever you are ready just let me know !!!


Thanks, Eddie Wheat
 
Back
Top