Richard Chudy cues

randyg00

randyg00

AzB Silver Member
Silver Member
Hello everyone. I'm trying to find information on richard chudy cues (RC3). Any info will help. I'm trying to find out how they hit? How do they compare to other custom cue makers? If anyone owns one and the pros and cons with the stick? And if the shafts are good or should I go buy a predator 314 2 shaft if I get a rc3 cue?
 
I have had two RC3 cues and they were both excellent playing cues with great shafts and an incredible hit. I would put the hit just a hair softer than a Cognoscenti but stiffer than the following cues that I have had that had flat face joints - Prewitt, White, Blackcreeks (4). I hope that helps.

-don
 
Chudy

Chudy's work is definitely top tier craftsmanship. He is highly respected for his designs and execution from buyers and other cue makers as well. His cues hold their value extremely well. As far as the 'hit' goes I would agree with Don (TheCoats). I have found them to be pretty consistent with all his cues. They are also very nicely balanced like a Cog. I think you would be very happy with an RC3 cue.
 
Chudy-

My first custom was a Rick Chudy six point with the single sided veneers. It hit very well, pretty stiff taper, but I like that.

You may want to consider one of MasonH cues if you are considering a Cog. His cues use very similar specs, 57.5 inches, G-10, etc but cost less than half of what you would pay for a similar Cognoscenti.

Rick's standard shafts are fine, so you don't need to buy a different shaft, in fact I would not recommend it.

He is a respected maker for sure, but his cues are relatively expensive. He doesn't generally like to make simple cues like a PJ, but I am sure he would if you wanted him to.
 
DJKeys said:
My first custom was a Rick Chudy six point with the single sided veneers. It hit very well, pretty stiff taper, but I like that.

You may want to consider one of MasonH cues if you are considering a Cog. His cues use very similar specs, 57.5 inches, G-10, etc but cost less than half of what you would pay for a similar Cognoscenti.

Rick's standard shafts are fine, so you don't need to buy a different shaft, in fact I would not recommend it.

He is a respected maker for sure, but his cues are relatively expensive. He doesn't generally like to make simple cues like a PJ, but I am sure he would if you wanted him to.
Click to expand...

half the price but the waiting list is still pretty long.....
 
sugeknight said:
Im thinking about getting one too.
My question is... Cog or RC3???
any opinions?
Click to expand...

I have a Chudy on order. He spent a lot of time working with me on wood combinations and designs. I'm not the easiest guy to work with, and I take my time making up my mind. He was patient and informative. The planned delivery date is this fall.
 
cogs...

Not to steer away from the thread but Cog cues hit great. I have two of them: one pj and another fancy one. They are best known for their balance and hit of course. But of all the cues i've test hit the Cogs's balance is the bread and butter. Not sure how he does it but everyone whose touched a cog always notices the great balance.

If any cue that i've tested doesn't seem "right" i've always looked at the shaft for the root of the problem. And for the most part finding a good shaft to test with will resolve any concerns.
 
You must log in or register to reply here.
Back
Top