Unique mech tools

[realkingcobra]

On weds I will post another great mech tool that will save you guys time and some of you def need it but yet again I'm on the ph

Try this one on for size John....I just turned a 3 1/4" door planner into a thickness planner for making featherstrips in seconds....adjustable thicknesses and all...in 1/64" increments from 3/8" down to 1/16"...hand held, or bench mounted

Glen

PS. It also has the ability to make 2 different thickness cuts without changing the settings....figure out how I did that one buddy!

 

[OTLB]

A simple rail system

 

[realkingcobra]

A simple rail system

Nope...try again

 

[OTLB]

Nope...try again

I forgot. You had tabletek make it for you like when you asked him to make other tooling you couldn't.

 

[realkingcobra]

I forgot. You had tabletek make it for you like when you asked him to make other tooling you couldn't.

Wrong again...keep trying Maybe I'll post some pictures of it here on AZ....kind of like you do ya know, but it works better than my 12" Delta thickness planner does, and 75% less time involved.

Glen

 

[OTLB]

here is a container that they sell gum in, it makes for a great dispenser for small screws, nails etc. Nice for when working on pockets or whatever. Less then $2 and will keep you organized and thusly saves time. I use 2, one for nails and one for pocket screws.

http://tinypic.com/r/2e331pu/7

 

[reverend]

Try this one on for size John....I just turned a 3 1/4" door planner into a thickness planner for making featherstrips in seconds....adjustable thicknesses and all...in 1/64" increments from 3/8" down to 1/16"...hand held, or bench mounted

Glen

PS. It also has the ability to make 2 different thickness cuts without changing the settings....figure out how I did that one buddy!

O O O O I know the answer!!! hahaha

 

[3kushn]

Thanks for the links to the csosborne.com I've been wanting another staple puller for a while now.

Check this one out. Same source. I like it better than the other one.

http://www.csosborne.com/no124.htm

aplostery supply houses is a sure place for price and availability.

 

[ROB.M]

staple puller

go with a crane no.126 staple puller or one like the one i showed you all on youtube.....
_
rob>m

 

[TableTek]

I can't post the pictures as of right now, but I have a motorized slate stair climber coming out for all you mechanics!!! Yes, that's right...a motorized dolly that'll walk the slates up/down stairs for you...all you have to do is hold onto the T-bar handle, push the up/down button and away you go, no more breaking your back or sweating your ass off to get slates up or down stairs. As soon as it's ready for production, 1-2 more weeks and I'll let you guys see the pictures of it...IN USE!

Glen

Hows that climber coming bud?
Long two weeks

 

[TableTek]

I forgot. You had tabletek make it for you like when you asked him to make other tooling you couldn't.

Hi John, Just saw comment! Funny stuff, you a right in that he had all these grand ideas of stuff I could do for him. I came close to making a climber, probably would have if he would've shown when he said. He sure is a funny Guy. I should make it and name it after him. The new "ErgoEgo 1000, with box truck survival tool kit". It has all terrain tires guaranteed against slippage in all but the worse Feces. A must have for all those bs'ers who can't seem to get there shoes clean. For a small upcharge you also equip with the balloon attachment for those who naturally produce copious amounts of hot air. It is only available in one color, sweat stained wife beater yellowish. Stay tuned for new "Really the Real King Cobra" line as we update our tooling to incorporate the industry leading "glue laminated wood baseplates"

Rob
Machinist-pool table mechanic-fact checker-general PITA
WWW.tabletek.net
215-622-8899

 

[realkingcobra]

Hi John, Just saw comment! Funny stuff, you a right in that he had all these grand ideas of stuff I could do for him. I came close to making a climber, probably would have if he would've shown when he said. He sure is a funny Guy. I should make it and name it after him. The new "ErgoEgo 1000, with box truck survival tool kit". It has all terrain tires guaranteed against slippage in all but the worse Feces. A must have for all those bs'ers who can't seem to get there shoes clean. For a small upcharge you also equip with the balloon attachment for those who naturally produce copious amounts of hot air. It is only available in one color, sweat stained wife beater yellowish. Stay tuned for new "Really the Real King Cobra" line as we update our tooling to incorporate the industry leading "glue laminated wood baseplates"

Rob
Machinist-pool table mechanic-fact checker-general PITA
WWW.tabletek.net
215-622-8899

You know what I like about guys like you Rob....you're to stupid to know when to quit running your mouth...keep it up...we'll meet up soon enough

 

[RackemBilliards]

Stair Climber

I can't post the pictures as of right now, but I have a motorized slate stair climber coming out for all you mechanics!!! Yes, that's right...a motorized dolly that'll walk the slates up/down stairs for you...all you have to do is hold onto the T-bar handle, push the up/down button and away you go, no more breaking your back or sweating your ass off to get slates up or down stairs. As soon as it's ready for production, 1-2 more weeks and I'll let you guys see the pictures of it...IN USE!

Glen

Well, I don't know about yours, but Hannibal Lecter sure has a sweet one in one of his movies. I think it was 'Red Dragon', and it was hand truck sized with three wheels on each side in a triangle. He strapped that dude to it, and it climbed the stairs while he guided it, right before he gutted him and pitched him out the window. The guys guts were all over the ground and all I could think was 'crap, I sure wish I had that hand truck'.

 

[realkingcobra]

Well, I don't know about yours, but Hannibal Lecter sure has a sweet one in one of his movies. I think it was 'Red Dragon', and it was hand truck sized with three wheels on each side in a triangle. He strapped that dude to it, and it climbed the stairs while he guided it, right before he gutted him and pitched him out the window. The guys guts were all over the ground and all I could think was 'crap, I sure wish I had that hand truck'.

I know the one you're talking about....what a mess, but what a dolly too:grin:

 

[realkingcobra]

Hi John, Just saw comment! Funny stuff, you a right in that he had all these grand ideas of stuff I could do for him. I came close to making a climber, probably would have if he would've shown when he said. He sure is a funny Guy. I should make it and name it after him. The new "ErgoEgo 1000, with box truck survival tool kit". It has all terrain tires guaranteed against slippage in all but the worse Feces. A must have for all those bs'ers who can't seem to get there shoes clean. For a small upcharge you also equip with the balloon attachment for those who naturally produce copious amounts of hot air. It is only available in one color, sweat stained wife beater yellowish. Stay tuned for new "Really the Real King Cobra" line as we update our tooling to incorporate the industry leading "glue laminated wood baseplates"

Rob
Machinist-pool table mechanic-fact checker-general PITA
WWW.tabletek.net
215-622-8899

Rob...you're a funny guy. What have you done to improve this industry...destroy rails?..install cloth backwards? screw your friends? Some things I'm working on take time, because I'm working on a lot of things at the same time...some things have to wait until it's their turn. Some of the things I've finally finished....is changing the way Diamond's tables play...and finally completed the 10 year wait of producing Diamond's 9ft straight rail billiards table, ready for distribution next month...orders are already in...and down payments made. Now...what is it again...YOU'VE done?...OH yeah, almost forgot...the DVDs for Simonis are in the bag also...so, again....WHAT is it...that YOU have done lately?

 

[Mr. Bond]

i betcha my belt-sander can beat your belt-sander in a 1/4 mile run

 

[Club Billiards]

i betcha my belt-sander can beat your belt-sander in a 1/4 mile run

LMAO Great post.

 

[TableTek]

What have I done for the industry? I do love the work and the freedom working for myself provides. That being said, I am in business so I don't feel that I am required to do anything other than what my service and customer support would need to grow. Do I need to be a "Yes Man" to save $10 on cloth? Nope. Do I need bottom dollar Chinese table pimps raving about my installs? Nope. Do I need a masterbatory DVD series to feel like I am the greatest ever? Nope.

I don't care about you bringing up mistakes I have made, I tell customers about that stuff all the time. The story of that rail I butchered a year and a half ago gets used when someone tries to get me to rush a job. There is a lot to be said for being open about your faults. I don't know where my place is in the industry yet, but it surely wont be on coat-tails.!

Are you coming up in March?

Rob

 

[realkingcobra]

What have I done for the industry? I do love the work and the freedom working for myself provides. That being said, I am in business so I don't feel that I am required to do anything other than what my service and customer support would need to grow. Do I need to be a "Yes Man" to save $10 on cloth? Nope. Do I need bottom dollar Chinese table pimps raving about my installs? Nope. Do I need a masterbatory DVD series to feel like I am the greatest ever? Nope.

I don't care about you bringing up mistakes I have made, I tell customers about that stuff all the time. The story of that rail I butchered a year and a half ago gets used when someone tries to get me to rush a job. There is a lot to be said for being open about your faults. I don't know where my place is in the industry yet, but it surely wont be on coat-tails.!

Are you coming up in March?

Rob

So, then I take it...you haven't done anything to help improve this industry...from what you're saying, so in other words....you're all about "you, you, you"...hmmmm....yet, you try and put someone else down...who cares enough about this industry...to stand up and do something about it....hmmmm...does that threaten you or something...or just make you jealous....that it's not YOU taking these steps to create change...for the good of this industry...that provides you the life you enjoy so much. So, I guess you're not a smart as you think you are....either that, or you really just don't give a shit....as most hacks don't care about anything either...as they're just about the money! No Rob, I don't think coming to your place of business...or what ever you want to call it...would be a real good idea, but that's fine for others...maybe next time...you'll actually have something productive to show everyone that shows up....instead of like last year...when all you could do was show what you COULDN'T do when it came time to show everyone.....but, couldn't do....because you didn't know what you were talking about....I sure hope you learned something in the last year

 

[TableTek]

Am I supposed to think you are doing all this out of altruistism? The DVD you got paid for plus royalties...the rkc billiards company..industry regulation ...and don't forget the 256 room pool hall in south Dakota? Stop drinking the punch already. You are so fake.