Sure, I assume that. I think you also need other visual cues like you mention here (rail, etc.), but that's for another thread.You need to know whether a shot is a thick or thin cut.
pj
chgo
Sure, I assume that. I think you also need other visual cues like you mention here (rail, etc.), but that's for another thread.You need to know whether a shot is a thick or thin cut.
Sure, I assume that. I think you also need other visual cues like you mention here (rail, etc.), but that's for another thread.
pj
chgo
That part makes sense to me... I remember during one of the debates I said "ok, I'll cover half the table with a black curtain, and you shoot balls into the corners you can't see"... and I think it was spidey who said he could actually do that. Dr. dave said something similar to what you're saying... we can use the lines we see in our peripheral to infer where the pockets are, even without seeing them.
I'd say that feat requires lots of time and experience at the pool table, aka feel.
Shoot the shot a few times by under cutting and by over cutting. You'll find that all your misses on under cut shots will result in an easy shot for your opponent. When you over cut the ball and miss you might sell out a bank at the most.
Also over cutting is actually playing the object ball at the pocket opening.
This thought of over cutting only applies to certain situations.
I don't think so. For an obvious example, should you overcut when you're shooting toward the rail and when you're shooting away from it?As far as I know, between overcutting and undercutting, overcutting is always better.
If you're talking about the center of the pocket opening (between the points), that's where you should be aiming in the first place, so overcutting and undercutting both miss the sweet spot.You'll make the ball more often since you're actually aiming at the opening of the pocket and you'll sell out a whole lot less.
This thought of over cutting only applies to certain situations.
When I first replied to your post about why overcutting is better than undercutting, you were talking about a ball on the rail. Like the shot in the video, right?
If I'm not mistaken, there's three ways you can hit a ball to go in the hole. You can hit it dead on, overcut it, or undercut it.
As far as I know, between overcutting and undercutting, overcutting is always better. You'll make the ball more often since you're actually aiming at the opening of the pocket and you'll sell out a whole lot less.
I'm interested in hearing if you know of any shots where undercutting would be better.
Does "cue it a half tip to the inside" mean:CJ:
CUE it a half tip to the inside (without spinning it)
Aiming a rifle has nothing in common with aiming a shot in pool.
First, a rifle has a rear sight, a front sight, and there is a target. You can touch these. You can feel these. I've yet to touch or feel any form of sights on a cue and there is no "Hit here" sign on the OB either.
Second, there are times in aiming a rifle, the muzzle is not pointed to where you want to hit. Distance and wind come into play when aiming a rifle also the weight of the bullet and the load of the round.
You may the same type of breathing methods used in shooting in making a shot in pool, but that's it.
I get so tired of the ole golf and pool comparisons. Two different sports with two different goals. A drive in golf has nothing to do with a pool shot. IF anything, putting is closer to shot making in pool, trying to get a ball in the hole the first time.
Thing is, in golf, you got one ball and one hole at a time, plus you do not have to get shape for your next tee shot. Ain't so in pool. You have to use the CB to make a OB and then get position for the next shot. Ain't nothing in playing golf that equals this.
There is nothing a player can do to increase a shots margin of error. To imply otherwise shows a lack of understanding of the geometry of a shot. A shots margin of error is determined by the pocket opening, OB distance from the pocket and OB angle into the pocket. How much of this area that can be used is determined by the OB/CB angle.
As for hitting center pocket- http://forums.azbilliards.com/showthread.php?t=272971
And just food for thought http://forums.azbilliards.com/showthread.php?t=272973
In another thread, I was looking at the pros shoot from above from/in a Sky box.
For slight thick cuts (almost straight in), it looks like the are using a little english, but it appears that they are using the shaft deflection to effect the shot, and at other times, they are using english to effect CIT.
Their aiming seems unconscious (they see the line to the pocket) and with more attention to the application of english and compensating for shaft deflection.
Thank.
Does "cue it a half tip to the inside" mean:
- aim the cue ball straight &
- hit the cue ball a little offcenter to the inside
or
- aim the cue ball a little to the inside &
- hit the cue ball in the center
Thanks,
pj
chgo
Miss any shot and im dogging it ,trying to play for the over cut (which only applies to certain shots for a safe and the game your playing and whats left on the table. )means maybe im scared i might dog it.Now if i just play for the over cut all the time i will probably miss hit it and make it some times.
Know one needs to reply im kinda talking to myself here.![]()
I'm sure it's nothing penicillin can't handle.CJ:
I have a plethora of analogies
We all go though this at different times and at different levels....if you go to my web site there's some free clips that may lead you to what you're searching for in your game.....learning is a journey, not a destination.
CJ WILEY
www.cjwiley.com
I'm sure it's nothing penicillin can't handle.
pj
chgo