How long does it take to finish a cue?
- Thread starter ace911
- Start date
What took him so long ?
It should be same day :thumbup:
Earl Scheib baby!
You'll obviously get several different answers on this question.
Type of finish being used is going to be the number one determining factor. One could be finished in as quick as just a few days while others would be better stretched into a few weeks for optimal results.
And under $100
Oops sorry for the flipped answer, but ya it depends on the finish. I have heard that with UV it could be done in a few min. Takes me about 3 days with epoxy.
Larry
Last edited:
Referring to simply the final finish...as in the shiny clear on the outside?
Or....taking wood from a plank to something that won't resemble a boomerang??
A perfect finish can take from 45 minutes to 8 months and everything in between.
U v
What does "FINISHED" mean? Cutting, sanding, spraying, finish sanding & polishing????????????? Or JUST SPRAYING ?...JER
Yeah, UV. There are a lot of different UV finishes all of which harden in seconds but some of them don't buff out well enough, some are too soft, some will yellow with time, and some can really work well most of the time.
In my opinion it takes the same length of time to finish a cue properly that a Human Female takes to have a Baby starting from conception on both projects!!!!!!!
JIMO
In my opinion it takes the same length of time to finish a cue properly that a Human Female takes to have a Baby starting from conception on both projects!!!!!!!
JIMO
He meant PUT on a new FINISH.
Hi,
11 days. I wait 10 day after spraying before wet sanding and buffing.
Rick
11 days. I wait 10 day after spraying before wet sanding and buffing.
Rick
